
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X850-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 850mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X850-100-S is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. With a nominal 850 mm stroke and a 100 mm adjustment range, it provides a usable travel window of 750 to 850 mm for exact end-position tuning during commissioning.
This unit includes a standard magnet (-S) for position sensing with CMSE reed or DMSE solid-state switches. It uses a G1/8 port, a 12 mm carbon steel rod with an M10x1.25 thread, and relies on 27 mm variable air cushions at both ends. The extruded aluminum barrel includes sensor grooves on both sides, and the mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X850-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 850 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×850 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance between 750 and 850 mm for tooling heads that require frequent depth adjustments without changing the cylinder.
Quickly adapt the extended position on a packaging line when product sizes change, using the rear screw to set a new end-stop rather than swapping hardware.
Fine-tune the final position during machine commissioning to avoid mechanical interference, using the 100 mm adjustment window to find the optimal travel.
Choose this 32 mm bore if you need precise retract tuning on a long 850 mm stroke without adding external stops; stepping up to a 40 mm bore raises the 0.5 MPa push force to 628 N for heavier loads. The 100 mm rear adjuster is a travel stop, not a lock, so it will not hold the load without live air. For fail-safe holding, consider an SAIL or BSAI cylinder. Because the 850 mm stroke is long relative to the 12 mm rod, an external guide rail is strongly recommended to prevent side-load damage. To replace an ISO 15552 unit, match the 32 bore, 850 stroke, 100 adjustment, PT tapered port, and -S magnet.
Quick checklist
The rear adjuster acts as a mechanical stop that lets you shorten the effective stroke from 850 mm down to 750 mm. It is a travel stop, not a lock, so the cylinder still requires live air pressure to hold its position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.