
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X850-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 850mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X850-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel to a precise 830-850 mm window. This extruded aluminum body includes sensor grooves on both sides for straightforward position feedback.
The integrated 20 mm adjustment screw lets you dial in the retract end-position during commissioning without adding external stops. Because this 850 mm stroke is long relative to the 32 mm bore, the 12 mm rod thread should be paired with an external guide to manage side loads. The rear adjuster functions strictly as a travel stop, not a lock, so it will not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X850-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 850 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×850 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 830-850 mm retract position during product size changes without physically swapping cylinders or repositioning hard stops.
Acts as a double-acting ISO 15552 profile cylinder for long-travel diverters, using the rear screw to fine-tune the end stop.
The adjustable stroke is ideal for machine setups requiring variable end-stops or product changeovers, replacing the need to swap out a fixed-stroke SAI cylinder. To match this cylinder for an ISO 15552 replacement, verify the 850 mm stroke, 20 mm adjuster, PT port thread, and your required mounting style from the available Basic, FA, LB, TC, FTC, TCM1, and TCM2 options. Note that FB, CA, CB, and CR mounts are omitted from the SAIJ series.
For any 850 mm stroke, supporting the load with an external guide is critical to prevent excessive side-loading on the rod. Furthermore, if your machinery requires true load-holding without continuous air pressure, a standard SAIJ will not suffice; you should explore an AirTAC SAIL with an air-released lock or a BSAI clamp-lock cylinder instead.
Quick checklist
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke by up to 20 mm, creating an 830-850 mm usable travel window. It functions as a travel stop and does not lock the load without live air pressure.
The operational speed range is 30-800 mm/s, supported by a G1/8 port and 27 mm cushions at both ends.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.