
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X850-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 850mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X850-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 32 mm bore and an 850 mm nominal stroke, yielding a usable travel window of 830-850 mm that can be fine-tuned by up to 20 mm during commissioning.
This model includes a magnet (-S) for use with AirTAC CMSE reed and DMSE electronic sensors, which seat neatly into the sensor grooves on both sides of the extruded aluminum barrel. The rear adjuster acts purely as a mechanical stop to dial in the retract end position; it does not hold the load without live air. For load-holding requirements without continuous pressure, consider the SAIL or BSAI series instead.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X850-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 850 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×850 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 830-850 mm retract position on lengthy material push-off stations without machining new hard stops.
Quickly adjust the end-of-stroke position by up to 20 mm when adapting automated machinery to slightly different product lengths.
Set precise retraction limits for long-travel conveyor sorting gates where minor mechanical variance occurs over distance.
Choose this 32 mm bore adjustable-stroke cylinder when an application requires precise end-position tuning of a long 850 mm travel without swapping components or adding external stops. Because this is a long stroke configuration, an external guide is recommended to prevent excessive side-loading on the rod.
As a dimensionally interchangeable ISO 15552 profile cylinder, it replaces equivalent ISO cylinders using a PT port thread, standard mounting attachments (Basic, FA, LB, TC, FTC, TCM1, TCM2), and a -S magnet. The adjustment screw is strictly a travel stop, not a locking mechanism, so pneumatic pressure must be maintained to hold a load.
Quick checklist
The rear adjuster screw allows you to shorten the effective travel from the nominal 850 mm down to 830 mm, creating an 830-850 mm usable window. It functions as a mechanical stop for end-position tuning and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.