
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X850-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 850mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X850-30-S is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 820 to 850 mm, allowing you to dial back the nominal 850 mm stroke by up to 30 mm without adding external stops.
This variant includes a magnet for CMSE reed and DMSE electronic sensors, fitting neatly into the extruded aluminum barrel grooves on both sides. The carbon steel rod with an M10x1.25 thread handles standard loads, but at 850 mm, an external guide is recommended to prevent side-load wear. It supports the SAIJ mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X850-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 850 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×850 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 820-850 mm window during machine commissioning without swapping out the entire cylinder.
Quickly adjust the stroke distance on packaging lines to accommodate varying product lengths without adding external mechanical stops.
Choose this 32 mm bore when you need precise end-position tuning at commissioning rather than the fixed travel of a standard SAI cylinder. If your application requires greater thrust, stepping up to the 40 mm bore yields 628 N at 0.5 MPa. Because the 850 mm stroke approaches the 1000 mm maximum for this bore, ensuring proper external guidance is critical to protect the rod from side-load damage.
The rear adjuster acts strictly as a travel stop to fine-tune the retract position, not as a locking device. It cannot hold a load without live air pressure. For applications requiring true load-holding in the event of pressure loss, consider the SAIL pneumatic lock or BSAI clamp-lock cylinders. This model uses PT tapered port threads and operates reliably at speeds between 30 and 800 mm/s.
Quick checklist
It can reach a maximum of 724 N at 0.9 MPa.
The rear adjuster screw allows you to shorten the effective stroke by up to 30 mm, creating a usable travel window of 820 to 850 mm. It functions as a mechanical stop for end-position tuning and does not lock the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.