
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X850-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 850mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X850-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. With a nominal 850mm stroke and a 40mm adjustment range, it provides a usable travel window of 810 to 850mm for precise end-position tuning.
This model uses a 12mm carbon steel rod with an M10x1.25 thread, and PT (tapered) G1/8 ports. The extruded aluminum barrel includes sensor grooves on both sides, though no magnet is installed on this version. The rear adjuster acts strictly as a mechanical stop to fine-tune the retract position without adding external shims, while the adjustable air cushions handle end-of-stroke deceleration.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X850-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 850 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×850 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance between 810 and 850mm for long-travel actuators without physically swapping the cylinder or machining external stop blocks.
Quickly adjust the end-stop position by up to 40mm to accommodate different package lengths on a conveyor sorting line during production transitions.
Fine-tune the final resting position of a 32mm bore actuator during machine setup, using the rear screw to perfectly time the 850mm travel sequence.
Selecting the SAIJ32X850-40 is ideal when an 850mm stroke needs exact end-position calibration during commissioning or product changeover. If your application requires less force, stepping down is not an option at this stroke length, but stepping up to a 40mm bore increases the 0.5MPa push force to 628N. Because the 850mm stroke is long, the 12mm rod requires an external guide to prevent binding and manage side loads.
This cylinder is dimensionally interchangeable per ISO 15552. For this exact configuration: 32mm bore, 850mm stroke, 40mm adjustment, PT G1/8 port, Basic/FA/LB/TC/FTC/TCM1/TCM2 mountings, and no magnet. Note that the rear adjuster is a travel stop, not a lock; the SAIJ does not hold loads without live air, so consider SAIL or BSAI variants if load-holding is required.
Quick checklist
At 0.7MPa, the push force increases to 563N.
The rear adjuster acts as a mechanical stop that lets you trim the effective stroke back by up to 40mm, creating an 810-850mm usable travel window. It is a travel stop, not a lock, and does not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.