
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X850-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 850mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X850-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 850 mm stroke that can be fine-tuned backward by up to 75 mm, giving operators a precise 775 to 850 mm usable travel window during commissioning.
Because the adjuster acts purely as a mechanical stop on the retract end, it cannot hold a load without live air pressure. For load-holding requirements, consider the SAIL or BSAI variants. This 32 mm bore model operates at speeds of 30-800 mm/s and uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X850-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 850 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×850 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 775-850 mm retract position precisely when switching between product formats, eliminating the need to physically swap out the entire cylinder.
Ideal for diverter gates on conveyors where the fully retracted position needs occasional calibration to accommodate different package sizes.
Fine-tune the end of stroke during machine commissioning to prevent mechanical crashes, using the rear stopper rather than adding external bumpers.
The adjustable stroke is ideal for product-size changeovers on a line, whereas a fixed SAI cylinder is better for static, unchanging end stops.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 850 mm stroke, 75 mm adjustment range, PT port thread, and standard carbon steel rod. Since this is a long 850 mm stroke, the 12 mm rod diameter will not support high lateral loads, so an external guide rail is mandatory to prevent premature seal wear. The rear screw adjusts travel but does not function as a lock.
Quick checklist
If you increase the operating pressure to 0.7 MPa, the push force rises to 563 N.
The rear adjuster screw acts as a mechanical stop that shortens the effective travel. For this model, you can trim the 850 mm nominal stroke back by up to 75 mm, resulting in a usable travel window of 775 to 850 mm.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.