
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X90-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 90mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X90-10 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 10mm trimming range, creating an 80-90mm usable travel window for precise end-position tuning at commissioning.
This adjustable-stroke design eliminates the need to swap cylinders or add external stops during machine setup. The extruded aluminum barrel features sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches (requires a -S magnet). It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB and CA options.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X90-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 80-90mm retraction point during machine commissioning without physically swapping the cylinder or adding bulky external stops.
Quickly adjust the stroke by up to 10mm on packaging lines to accommodate slightly different product lengths on the fly.
Choose this 32mm bore when an application requires precise mechanical end-stop tuning within an 80-90mm travel window. If your setup needs less force, stepping down is not an option below 32mm, but if you need more thrust, the 40mm bore provides 628N at 0.5 MPa. The carbon steel rod with an M10x1.25 thread handles moderate side loads well, though long unsupported strokes still require an external guide.
An adjustable stroke is preferred over a fixed SAI cylinder when you need variable end-stops for product changeovers. To match this ISO 15552 replacement exactly, specify: 32mm bore, 90mm stroke, 10mm adjustment, PT tapered port thread, and no magnet. Remember that the rear adjuster acts only as a travel stop; it does not hold the load without live air, so consider SAIL or BSAI variants if load-holding is required.
Quick checklist
It features a rear adjusting screw that allows you to shorten the effective stroke by up to 10mm. This creates an 80-90mm adjustable travel window, letting you fine-tune the end position without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.