
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X90-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 90mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X90-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that lets you dial the travel back by up to 20 mm. This yields a usable 70-90 mm stroke window, allowing you to fine-tune the retract end position at commissioning without swapping out the unit.
The carbon steel rod with an M10x1.25 thread handles moderate side loads, while the extruded aluminum barrel includes sensor grooves on both sides for CMSE or DMSE switches. It features a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB and CA options. The rear screw acts only as a travel stop, so it will not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X90-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 70-90 mm retract position during machine commissioning to perfect product alignment without re-machining hard stops.
Quickly adapt the cylinder's effective stroke on packaging lines when running slightly different package lengths, minimizing downtime.
Apply 402 N of clamping force at 0.5 MPa while adjusting the retract depth to accommodate varying workpiece thicknesses on the fly.
The adjustable stroke is ideal for machine changeovers where the exact retract position varies slightly, saving you from machining external stops or buying a fixed-stroke SAI cylinder.
If you need to match an ISO 15552 replacement, specify the 90 mm stroke, 20 mm adjustment range, PT tapered port thread, and carbon steel rod. Because this cylinder lacks a magnet, position sensing requires adding an external switch to the groove. For any load-holding requirements without continuous air, the SAIJ adjuster will not act as a brake—consider the SAIL or BSAI series instead.
Quick checklist
The 90 mm nominal stroke paired with the 20 mm rear adjuster gives a usable travel window of 70 to 90 mm.
No, the rear adjuster functions strictly as a mechanical travel stop to set the end position and relies on the air cushion for deceleration. It is not a lock or brake; for load-holding without live air pressure, look to the SAIL or BSAI series.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.