
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X90-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 90mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X90-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 70-90mm usable travel window, letting you dial back the 90mm nominal stroke by up to 20mm during machine commissioning. The extruded aluminum barrel features sensor grooves on both sides, and because this SKU includes the -S magnet, it supports AirTAC CMSE reed and DMSE electronic solid-state switches for precise position detection.
This model utilizes a PT tapered port thread and a 12mm carbon steel rod. The rear adjustment screw acts strictly as a mechanical stop to fine-tune the retract end position without requiring external stops or cylinder replacement. It includes adjustable air cushions at both ends to manage deceleration, operating reliably at speeds between 30 and 800 mm/s. The mounting interface covers Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting the FB, CA, CB, and CR styles found in some standard lines.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X90-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 70-90mm retract position during initial commissioning without swapping out cylinders or adding external stopper blocks.
Quickly adjust the end-stop by up to 20mm to accommodate slightly different product sizes on the same production line.
Fine-tune the final resting position of tooling with the rear mechanical stop, ensuring precise physical contact without relying solely on software limits.
Choose this 32mm bore adjustable-stroke cylinder when your application requires exact end-position tuning at setup or during product changeover, rather than the fixed travel of a standard SAI cylinder. Remember that the rear adjuster and air cushions only regulate travel and deceleration; they do not hold the load securely without live air pressure. For true fail-safe load holding, consider the SAIL pneumatic lock or BSAI clamp-lock series instead.
To match this ISO 15552 cylinder for a direct replacement, verify the 32mm bore, 90mm nominal stroke, 20mm adjustment range, PT port thread, and the -S magnet option. The 12mm rod with an M10x1.25 thread handles standard loads well, but for any specific side-load concerns, ensure external guiding is used to prevent premature seal wear.
Quick checklist
The rear adjuster screw allows you to shorten the 90mm nominal stroke by up to 20mm, creating a 70-90mm usable travel window. The adjuster acts as a mechanical stop to set the retract end position and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.