verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X90-40S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X90-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 90mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke90 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$66.03 $73.53Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X90-40S

The AirTAC SAIJ32X90-40-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 90 mm nominal stroke by up to 40 mm for a precise 50-90 mm usable travel window. The extruded aluminum barrel features sensor grooves on both sides, and because this unit includes the -S magnet, it directly supports AirTAC CMSE reed and DMSE electronic solid-state switches for precise position verification.

The rear adjustment screw acts purely as a mechanical stop to fine-tune the retract end position during commissioning or product changeover, saving you from swapping cylinders or adding external stops. It uses a carbon steel rod with an M10x1.25 thread and a PT tapered port. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting the FB, CA, CB, and CR mounts found on some other series.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X90-40S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X90-40S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke90 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X90-40S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×90Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X90-40S Is Used

tune

Machine Changeover

Dial in the 50-90 mm stroke window during product size transitions to set new retract positions without physically swapping the cylinder.

precision_manufacturing

Variable End Stops

Use the 40 mm rear adjustment screw to fine-tune the end-of-stroke position during commissioning, avoiding the need for external mechanical stops.

settings_input_component

Sensor-Ready Positioning

Leverage the built-in -S magnet with DMSE electronic sensors to confirm exact positions across the adjusted travel range in compact assembly lines.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X90-40S the Right Cylinder?

If your process requires less force, stepping down is not an option in this series, but if you need significantly more thrust, the 40 mm bore provides 628 N. The adjustable rear stopper is ideal for machine setups requiring variable end positions without buying multiple fixed-stroke SAI cylinders. Remember that the adjuster is a travel stop, not a lock; if you need to hold a load without live air pressure, consider an AirTAC SAIL pneumatic lock, a BSAI clamp-lock cylinder, or an external pilot-operated check valve. This model is dimensionally interchangeable per ISO 15552, featuring a PT port and a carbon steel rod.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X90-40S FAQ

The rear adjuster screw lets you shorten the effective stroke by up to 40 mm, creating a usable travel window of 50-90 mm. It functions as a mechanical stop for end-position tuning, not as a lock, meaning the cylinder still requires live air to hold the load.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X90-40S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X90-40S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.