
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X90-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 90mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X90-75 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the 90 mm nominal travel to a precise usable window of 15-90 mm.
This extruded aluminum profile cylinder features a 12 mm carbon steel rod and a PT G1/8 port. The rear adjuster acts purely as a travel stop for commissioning flexibility, not a load lock. For position holding without live air pressure, an external SAIL lock or pilot-operated check valve is required.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X90-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 15-90 mm stroke window during format changes on packaging lines, allowing rapid adaptation to varying carton sizes without changing the cylinder.
Fine-tune the retraction end position during machine commissioning to prevent mechanical crashes, using the rear screw to set the exact travel limit.
Provide adjustable physical stops for testing fixtures where the effective stroke needs to be repeatedly trimmed back from the 90 mm maximum.
Choose the SAIJ32X90-75 when your machine setup requires frequent variable end-stop adjustments across a 15-90 mm window, avoiding the need to bolt on external stops. Conversely, if you only need a fixed 90 mm stroke, the standard SAI provides a simpler setup.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 90 mm stroke, PT G1/8 port, and mounting choice. SAIJ supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. Note that this standard version lacks a magnet; adding the -S option enables CMSE reed and DMSE electronic sensors.
Quick checklist
The rear adjuster screw allows you to shorten the 90 mm nominal stroke by up to 75 mm, creating a usable travel window of 15 to 90 mm. The adjuster functions as a mechanical stop to set the end position and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.