
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X90-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 90mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X90-75-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 90 mm travel by up to 75 mm. This yields a highly flexible 15-90 mm usable stroke window, perfect for machinery requiring frequent product-size changeovers without swapping out physical components.
Featuring a standard carbon steel piston rod and a PT tapered port thread, this extruded aluminum profile cylinder includes a magnet for position sensing. It is fully compatible with AirTAC CMSE reed and DMSE solid-state switches fitted into the dual-side sensor grooves. The rear adjuster acts purely as a mechanical stop for end-position tuning, meaning it will not hold a load safely without continuous live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X90-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 15-90 mm travel window during format changes on packaging lines to accommodate varying package sizes without replacing the cylinder.
Fine-tune the exact end-of-stroke position during machine setup to perfect sensor triggering and mechanical engagement without adding external stoppers.
Use the 75 mm rear adjustment range to dynamically set multiple retract positions for testing actuators or probing different workpiece heights.
Choose this 32 mm bore adjustable-stroke cylinder when your application requires fine end-position tuning at commissioning or frequent travel adjustments, avoiding the need to bolt on external stops or buy multiple fixed-stroke SAI cylinders. If your process needs less push force, stepping down is not an option below 32 mm in this series, but if you require significantly more thrust, a 40 mm bore provides 628 N at 0.5 MPa. Because the 90 mm nominal stroke is relatively short, side-load stress on the 12 mm rod is minimal, though an external guide remains recommended for heavy lateral loads.
To match this ISO 15552 cylinder for a direct replacement, verify the 32 mm bore, 90 mm stroke, 75 mm adjustment range, PT port thread, and the -S magnet option. Remember that the SAIJ mounting set is limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR brackets. For applications requiring true load-holding without live air, consider the SAIL or BSAI series instead, as the SAIJ adjuster only restricts travel.
Quick checklist
The rear adjuster screw lets you shorten the nominal 90 mm stroke by up to 75 mm, providing a usable travel window of 15 to 90 mm. It acts as a mechanical stop to set the end position and does not lock the load without live air.
At 0.9 MPa, the push force increases to 724 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.