
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X900-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 900mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X900-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 10mm fine-tuning range, allowing you to dial the effective travel window down from the 900mm nominal stroke to a precise 890mm minimum without adding external stops.
This bore 32 unit features a 12mm carbon steel rod and M10x1.25 rod thread. Because the 900mm stroke is long relative to the bore, an external guide is recommended to prevent rod sag and side-load damage. The extruded aluminum barrel includes sensor grooves on both sides, ready for AirTAC CMSE reed or DMSE electronic switches if you add a magnet later.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X900-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 890-900mm travel window during product line changeovers to hit exact end-stops without remounting the actuator.
Adjust the rear stopper screw on the fly to alter the extended position by up to 10mm for varying package sizes on a conveyor.
Trim the 900mm stroke precisely during initial machine commissioning to dial in the exact end-of-stroke deceleration point.
Choose this adjustable model over a fixed SAI cylinder when your machine commissioning requires trimming the end-of-stroke position by up to 10mm to accommodate product size changes without physically swapping the actuator.
For ISO 15552 replacement matching, ensure your specifications align with this SKU: 32mm bore, 900mm stroke, 10mm adjustment range, PT tapered port threads, and the SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Given the 900mm stroke, always support the load with an external guide. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for dead-end load holding, consider the SAIL or BSAI series.
Quick checklist
The rear adjuster screw acts as a mechanical stop that lets you shorten the 900mm nominal stroke down to 890mm. This creates a 10mm usable travel window for fine-tuning the end position at commissioning without swapping the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.