
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X900-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 900mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X900-100 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 900 mm stroke with an adjustable travel window of 800 to 900 mm, allowing you to dial in the exact retract position at commissioning.
Because the adjuster acts purely as a mechanical stop and works alongside the standard air cushions, it decelerates the load but does not hold it without live air. For position holding without pneumatic pressure, an external rod lock or a related SAIL lock cylinder is required. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic switches if a magnet is specified later.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X900-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the retract position from 800 to 900 mm during machine setup, accommodating different product lengths without changing the cylinder.
Fine-tune the final resting position during commissioning to achieve precise alignment, using the rear screw rather than adding external shims.
Adjust the stroke on packaging or sorting lines to handle varying package sizes, ensuring accurate positioning across product runs.
Choose this 32 mm bore when you need precise end-position tuning over a long 900 mm travel, avoiding the need to swap cylinders or bolt on external stoppers during product changeovers. Conversely, if you only need to adjust a shorter travel, a smaller adjustment code like -20 provides a tighter tuning window.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 900 mm stroke, G1/8 PT port, and mounting style. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB, CA, CB, and CR. At 900 mm of travel, the 12 mm rod and M10x1.25 thread need external guiding to prevent excessive side-loading and rod deflection.
Quick checklist
At its maximum operating pressure of 1.0 MPa, it delivers up to 82 kgf.
The rear adjuster screw allows you to shorten the effective stroke by up to 100 mm, creating an 800 to 900 mm usable travel window. It functions as a mechanical stop for end-position tuning and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.