
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X900-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 900mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X900-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This built-in adjustability allows you to dial in exact retract end positions during commissioning without adding external stops.
Fitted with a PT tapered port (G1/8) and a 12mm carbon steel rod with an M10x1.25 thread, this unit includes a magnet (-S) for CMSE reed and DMSE electronic sensors. Because the 900mm stroke is quite long for a 32mm bore, the relatively small rod diameter means external load guiding is strongly recommended to prevent excessive side-loading. The rear adjuster acts purely as a travel stop for deceleration alongside the standard air cushions, not as a lock to hold the load without live air.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X900-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Adjust the retract distance by up to 100mm to accommodate different package sizes on a sorting line without physically changing the cylinder mounting.
Dial in the exact 800-900mm retract position during machine setup to perfectly align tooling, avoiding the need for machined spacer blocks.
Utilize the full 900mm travel for pushing materials between workstations, relying on the built-in air cushion and stopper for smooth end-of-stroke deceleration.
Choose this 32mm bore when you need precise position tuning on a long-stroke machine; if you need more push force, stepping up to the 40mm bore yields 628N at 0.5 MPa. The adjustable stroke is ideal for product changeovers where retract distances vary slightly, saving the cost of swapping a fixed-stroke SAI cylinder. When matching your ISO 15552 replacement, verify the 900mm stroke, 100mm adjuster, PT port thread, and the -S magnet requirement.
For any 900mm stroke, always support the load with an external guide to protect the 12mm rod from bending. Remember that the rear adjuster only sets the travel end; if the application requires the cylinder to hold its position without continuous air pressure, you must use an external rod lock or a SAIL pneumatically-released lock cylinder instead of relying on the SAIJ stopper.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82kgf.
The rear adjuster screw allows you to shorten the effective stroke by up to 100mm, creating an 800-900mm usable travel window. It acts as a mechanical stop to set the exact end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.