
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X900-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 900mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X900-20 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 900 mm travel that can be fine-tuned down by up to 20 mm, giving you an exact 880-900 mm usable window to dial in end positions during commissioning.
This model uses a standard carbon steel piston rod with an M10x1.25 thread, paired with a PT tapered G1/8 port. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. While the rear adjuster screw sets the retract deceleration point alongside the standard air cushions, it acts strictly as a travel stop and will not hold a load without continuous live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X900-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 880-900 mm retract position on the fly during product family changeovers, eliminating the need to physically swap cylinders or bolt on external mechanical stops.
Dial in the exact end-of-stroke location for diverter gates or pusher mechanisms on a packaging line, using the 20 mm adjustment window to perfect the stroke distance.
Trim the effective travel back by a few millimeters during initial machine commissioning to prevent mechanical interference, ensuring precise positioning without cylinder replacement.
Choose this 32 mm bore when you need precise 880-900 mm travel tuning but only moderate force; if your application requires more thrust, stepping up to the 40 mm bore yields 628 N at 0.5 MPa. The adjustable stroke is ideal for machine setups requiring variable end-stops or product changeovers, avoiding the need to swap out a fixed-stroke SAI cylinder. To match this exact ISO 15552 footprint, specify the 32 mm bore, 900 mm stroke, 20 mm adjustment, PT G1/8 port, and your preferred mounting from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Because the 900 mm stroke is lengthy for a 32 mm bore, the 12 mm rod and M10x1.25 thread have limited side-load capacity. An external guide rail is highly recommended to prevent rod binding over this extended travel. For applications needing true load-holding without air pressure, consider an AirTAC SAIL or BSAI cylinder instead of relying on the adjuster stop.
Quick checklist
The rear adjuster screw allows you to shorten the effective stroke by up to 20 mm from the 900 mm nominal length, creating an 880-900 mm travel window. It functions as a mechanical stop for end-position tuning and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.