
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X900-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 900mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X900-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated -S magnet enables precise position detection with AirTAC CMSE reed or DMSE electronic solid-state switches.
This model uses a 12mm carbon steel rod with an M10x1.25 thread and PT tapered port threads. Because the adjuster acts as a mechanical stop at the retract end, it allows for rapid end-position tuning during commissioning without adding external stops. The rear screw and the variable air cushions only decelerate the travel end; neither will hold a load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X900-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 880-900mm window during machine commissioning without swapping out the entire cylinder.
Quickly adjust the stroke by up to 20mm on a packaging line to accommodate different carton sizes on the fly.
Leverage the built-in magnet with CMSE or DMSE sensors to confirm the adjusted end-position in automated assembly equipment.
The adjustable stroke is ideal for machine setups requiring variable end-stops or product changeovers, providing flexibility that a fixed-stroke SAI cylinder cannot offer. For load-holding without continuous air pressure, an external rod lock or a SAIL/BSAI series cylinder is required, as the SAIJ adjuster is strictly a travel stop.
To replace an ISO 15552 cylinder, match the 32mm bore, 900mm stroke, 20mm adjustment, PT port threads, and the -S magnet. Ensure your mounting choice falls within the SAIJ subset: Basic, FA, LB, TC, FTC, TCM1, or TCM2. Given the 900mm stroke, the 12mm rod needs external guidance to prevent excessive side-loading and premature seal wear.
Quick checklist
At 0.7 MPa, the push force increases to 563N.
The rear mechanical adjuster allows you to shorten the 900mm nominal stroke by up to 20mm, providing an effective travel range of 880-900mm. It functions as a hard stop for end-position tuning and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.