
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X900-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 900mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X900-30-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel window between 870 and 900 mm during commissioning. The extruded aluminum barrel includes sensor grooves on both sides, supporting CMSE reed and DMSE electronic switches for precise end-position detection.
This model omits the FB, CA, CB, and CR mounting options, utilizing a reduced interface set of Basic, FA, LB, TC, FTC, TCM1, and TCM2. The rear adjuster acts strictly as a travel stop to set the end position and relies on the integrated air cushions for deceleration; it does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X900-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-stop from 870 to 900 mm on the fly when adapting a production line to varying material lengths.
Fine-tune the retract end position during commissioning without adding external mechanical stops to the framework.
Adjust the stroke window on a sorting pusher to handle different package sizes on the fly.
An adjustable stroke is ideal for machine setups requiring variable end-stops or product-size changeovers without physically swapping the cylinder. For load-holding without continuous air pressure, consider the SAIL or BSAI series, as the SAIJ adjuster is not a locking mechanism. Since the stroke is 900 mm, an external guide rail is recommended to prevent excessive side-load on the 12 mm rod. Direct ISO 15552 replacement requires a 32 mm bore, 900 mm stroke, 30 mm adjustment, PT G1/8 ports, and a magnet for CMSE/DMSE sensors.
Quick checklist
It reaches a maximum of 82 kgf at 1.0 MPa.
The rear adjuster screw allows you to shorten the effective travel from the nominal 900 mm down to 870 mm. This creates a 30 mm tuning window for setting exact end positions without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.