
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X900-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 900mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X900-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel down by up to 40 mm. This yields a usable stroke window of 860 to 900 mm, letting you dial in the retract end-position at commissioning without adding external stops.
Equipped with a 12 mm carbon steel rod and M10x1.25 threading, this 32 mm bore unit is designed for PT tapered port connections (G1/8) and includes variable air cushions at both ends. The extruded aluminum barrel features sensor grooves on both sides, enabling direct mounting of CMSE reed or DMSE electronic sensors if position feedback is later required.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X900-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 860-900 mm window during initial commissioning to align tooling without machining custom spacers.
Quickly adapt the end-stop for different package lengths on a packaging line by turning the rear adjuster screw instead of replacing the cylinder.
Use the 40 mm adjustment range to micro-align a long-travel pushing mechanism, compensating for minor mechanical drift over the 900 mm travel.
Choose this adjustable-stroke model when your equipment requires precise end-stop tuning during changeovers, avoiding the need to physically swap a fixed-stroke SAI cylinder. The rear adjuster acts solely as a travel stop and does not hold the load without live air; for true fail-safe load holding, consider the SAIL or BSAI series.
Because the 900 mm stroke is substantial for a 32 mm bore, the unsupported rod is highly susceptible to side loading and deflection. An external guide rail is strongly recommended to prevent premature seal wear and rod bending. This cylinder uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and is dimensionally interchangeable per ISO 15552.
Quick checklist
The maximum thrust is 82 kgf at 1.0 MPa.
The rear adjuster screw acts as a mechanical stopper, allowing you to shorten the 900 mm nominal stroke by up to 40 mm. This creates an adjustable 860 to 900 mm travel window for fine-tuning end positions without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.