
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X900-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 900mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X900-40-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 40 mm. This yields a usable window of 860-900 mm, enabling precise end-position tuning at commissioning without swapping the cylinder or adding external stops.
Because the 900 mm stroke is substantial for a 32 mm bore, the 12 mm carbon steel rod and M10x1.25 thread provide a robust interface, though an external guide is still recommended to manage side loads on long extensions. The rear adjuster acts purely as a travel stop for deceleration alongside the variable air cushions; it does not hold the load without live air. For load-holding without pressure, consider an external pilot-operated check valve or the related SAIL lock cylinder.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X900-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 860-900 mm travel window during machine commissioning to perfect positioning without machining external stoppers.
Quickly adjust the retract end-position on packaging lines when handling different carton sizes, saving downtime on manual modifications.
Leverage the -S magnet and dual sensor grooves to mount CMSE or DMSE switches exactly where needed along the adjusted travel path.
The integrated -S magnet works seamlessly with AirTAC CMSE reed and DMSE electronic sensors for precise position detection.
When replacing an ISO 15552 cylinder, match the 900 mm stroke, 40 mm adjustment range, PT G1/8 port, and the SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that SAIJ omits the FB, CA, CB, and CR mounts. Given the 900 mm stroke, always support the load with an external guide to prevent rod binding and premature wear.
Quick checklist
The rear adjusting screw acts as a mechanical stopper, allowing you to shorten the 900 mm nominal stroke by up to 40 mm. This creates an adjustable 860-900 mm travel window for fine-tuning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.