
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X900-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 900mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X900-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates an 850-900 mm usable travel window. A 12 mm carbon steel rod and M10x1.25 thread provide a robust interface for this extended 900 mm stroke.
This model uses a PT tapered port thread and lacks a standard magnet, meaning position sensing via CMSE or DMSE switches is not supported out of the box. The rear stopper allows you to fine-tune the retract position during commissioning without adding external stops. Remember that this adjuster acts only as a travel stop and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X900-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Pushes items across a conveyor over a 900 mm span, using the 50 mm adjustment to fine-tune the retract distance for varying product sizes.
Dials in the exact end-of-stroke position during setup without machining external stopper blocks or swapping the entire cylinder.
Quickly adjusts the travel window from 900 mm down to 850 mm on packaging lines when switching to a different package format.
The adjustable 50 mm window is ideal for product changeovers, whereas a fixed SAI cylinder locks you into one exact end-stop. Because the stroke is 900 mm, an external guide is recommended to prevent excessive side-loading on the 12 mm rod.
This SAIJ variant is dimensionally interchangeable per ISO 15552 and uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR. It uses PT ports and operates at speeds of 30-800 mm/s. If your application requires the load to be held mechanically without continuous air pressure, consider the SAIL or BSAI series instead, as the SAIJ adjuster is not a locking mechanism.
Quick checklist
At the maximum pressure of 1.0 MPa, it can deliver up to 82 kgf.
The rear adjuster acts as a mechanical stop that lets you shorten the effective stroke by up to 50 mm, creating an 850-900 mm travel window. It is used for fine-tuning end positions at commissioning but does not lock or hold the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.