verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X900-75

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X900-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 900mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke900 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$133.96 $141.46Save 5% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X900-75

The AirTAC SAIJ32X900-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 825-900 mm, letting you dial back the 900 mm nominal stroke by up to 75 mm during commissioning.

This carbon steel rod unit uses a G1/8 port and M10x1.25 rod thread. Because the 900 mm stroke is long relative to the 12 mm rod diameter, an external guide is strongly recommended to prevent excessive side-loading. The extruded aluminum barrel includes sensor grooves on both sides, though this specific SKU is configured without a magnet for CMSE or DMSE switches.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X900-75 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X900-75
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke900 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X900-75

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×900Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X900-75 Is Used

tune

Machine Setup Calibration

Fine-tune the 825-900 mm travel window during initial machine commissioning to perfectly dial in the end-of-stroke position without hardware changes.

settings_input_component

Product Changeover

Quickly adjust the rear stopper by up to 75 mm to accommodate varying product sizes on a single production line without replacing the actuator.

conveyor_belt

Variable End Stops

Set precise retract positions for indexing or pushing tasks where the exact 900 mm stroke needs slight trimming to match fixture locations.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X900-75 the Right Cylinder?

Choose this adjustable model over a fixed-stroke SAI when you need precise end-position tuning without swapping cylinders or adding external stops. Remember that the rear adjuster acts only as a travel stop; it does not hold the load without live air pressure. For load-holding, select an SAIL or BSAI cylinder.

For an exact ISO 15552 replacement, match the 32 mm bore, 900 mm stroke, 75 mm adjustment, PT port thread, and standard carbon steel rod. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Given the 900 mm stroke, always use an external guide to support the rod and prevent binding.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X900-75 FAQ

The standard speed range is 30-800 mm/s.

The rear adjuster screw acts as a mechanical stop that shortens the effective travel. For this SAIJ32X900-75, you can trim the 900 mm nominal stroke back to any length down to 825 mm.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X900-75

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X900-75 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.