
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X95-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 95mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X95-20 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 75 to 95 mm, allowing you to dial back the 95 mm nominal stroke by up to 20 mm during commissioning.
The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. Unlike fixed-stroke SAI units, this model omits the FB, CA, CB, and CR mounting interfaces, offering a streamlined set of Basic, FA, LB, TC, FTC, TCM1, and TCM2 attachments. The M10x1.25 carbon steel rod handles moderate side loads, while the PT tapered port ensures a tight pneumatic seal.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X95-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the retract end position by up to 20 mm during machine setup to accommodate varying product sizes without external stopper blocks.
Rapidly adjust the effective stroke from 95 mm down to 75 mm when switching between different package lengths on a packaging conveyor.
The 20 mm rear adjustment screw is ideal for fine-tuning end positions during product changeovers without swapping the cylinder or adding external stops. Keep in mind the adjuster acts as a travel stop and deceleration aid, not a lock—the cylinder will not hold its position without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
Because the total stroke is under 300 mm, the 12 mm rod diameter generally handles the unsupported length without requiring an external guide. This cylinder is dimensionally interchangeable per ISO 15552, featuring a PT port, carbon steel rod, and no magnet. If sensor detection is needed, you would specify a -S variant.
Quick checklist
The rear adjuster screw allows you to shorten the effective stroke by up to 20 mm, creating a usable travel window of 75 to 95 mm. It acts as a mechanical stop to set the end position precisely during commissioning.
The maximum thrust is 82 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.