
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X95-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 95mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X95-20-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 95mm travel that can be fine-tuned backward by up to 20mm, creating a usable 75-95mm end-position window. The integrated magnet (-S) supports CMSE reed and DMSE electronic sensors for exact position feedback.
This model uses a carbon steel rod with an M10x1.25 thread and a PT tapered port. Unlike fixed-stroke SAI units, the rear stopper screw allows commissioning tweaks without adding external physical stops. The extruded aluminum barrel includes sensor grooves on three sides for flexible switch mounting.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X95-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 75-95mm retract position during commissioning to align stops perfectly without machining new spacers.
Quickly adjust the end-stop by up to 20mm on a packaging line when switching between different box sizes.
Leverage the -S magnet with DMSE electronic sensors to confirm the adjusted end-position in control logic.
The 20mm adjustment range is ideal for product changeovers on a packaging line, letting operators dial in the exact retract end-position without swapping cylinders. For strokes of 95mm, side-load is minimal, but always guide the load if pushing heavy assemblies.
Remember the rear adjuster acts as a travel stop, not a lock; it will not hold the load without live air. For true load-holding, use an external pilot-operated check valve or the SAIL/BSAI series. This SAIJ unit is dimensionally interchangeable per ISO 15552 and accepts Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Quick checklist
The rear adjuster screw lets you shorten the nominal 95mm stroke by up to 20mm, giving a usable travel window of 75-95mm. This stopper only sets the end position; it does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.