
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X95-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 95mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X95-30 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 65-95 mm usable travel window, allowing you to dial back the 95 mm nominal stroke by up to 30 mm during commissioning.
This model features a 12 mm carbon steel piston rod and a PT tapered G1/8 port. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE solid-state switches if a magnet is specified later. The rear stopper sets the end position but does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X95-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 65-95 mm travel window during initial commissioning to perfectly align stops without swapping cylinders.
Quickly adjust the rear stopper to accommodate varying part sizes on a single production line.
An adjustable stroke is ideal for variable end-stops and product changeovers, whereas a fixed SAI cylinder is preferred for set-and-forget repetitive cycles. If you need to hold a load mechanically without live air, consider the SAIL or BSAI series instead.
For ISO 15552 interchangeability, match the 32 mm bore, 95 mm stroke, 30 mm adjustment, PT G1/8 port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the stroke is under 300 mm, side-load risks are minimal, but external guides are still recommended for heavy lateral loads.
Quick checklist
The maximum force is 82 kgf at 1.0 MPa.
The rear adjuster acts as a mechanical stop that trims the 95 mm nominal stroke. This creates a 65-95 mm usable travel window, allowing you to set the exact end position without adding external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.