
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X95-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 95mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X95-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The integrated -40 adjustment code allows you to trim the nominal 95 mm stroke back by up to 40 mm, creating a precise 55-95 mm usable travel window for fine-tuning retract end positions without adding external stops.
This variant includes a magnetic piston (-S) for position sensing via AirTAC CMSE reed or DMSE electronic switches fitted into the dual-side sensor grooves on the extruded aluminum barrel. It uses a PT tapered port thread, a 12 mm carbon steel rod, and provides variable air cushioning at both ends to decelerate the load smoothly.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X95-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 55-95 mm retract distance precisely when switching between product sizes on a packaging line, avoiding the need to physically swap cylinders or reposition hard stops.
Fine-tune the final resting position of a small tooling plate during commissioning, using the rear adjuster to compensate for mechanical tolerances without external shims.
Leverage the magnetic piston with DMSE electronic sensors to confirm the adjusted end position, ensuring repeatable signaling across variable stroke lengths.
The rear screw acts purely as a travel stop for setting the 55-95 mm window; it does not lock or hold the load without live air. For load-holding requirements without continuous pneumatic pressure, consider an AirTAC SAIL pneumatic lock or BSAI clamp-lock cylinder instead.
To match this ISO 15552 dimensionally interchangeable cylinder, confirm the 95 mm nominal stroke, the 40 mm adjustment range, the PT G1/8 port, and your required mounting style from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the 12 mm rod is relatively slender, ensure external guiding is used if the application induces significant lateral side loads.
Quick checklist
The rear adjuster screw allows you to shorten the effective travel by up to 40 mm. This turns the nominal 95 mm stroke into a 55-95 mm adjustable window, functioning as a physical stop to set the exact retract end position during setup.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.