
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X950-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 950mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X950-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel window down to 940-950 mm. The barrel utilizes an extruded aluminum profile with sensor grooves on both sides, distinguishing it from traditional tie-rod constructions.
This specific SKU features a carbon steel rod with a PT tapered port thread (G1/8). Because the 950 mm stroke exceeds the standard 1000 mm maximum for this bore, it is manufactured as a non-standard made-to-order unit. The rear adjuster acts purely as a travel stop to decelerate the piston, not as a lock, meaning it cannot hold a load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X950-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 940-950 mm travel window during machine commissioning to perfectly align long-stroke pick-and-place movements.
Quickly retract the end-stop by up to 10 mm to accommodate varying material lengths on automated feed lines.
Fine-tune the retraction end position without adding external physical stops or replacing the entire cylinder.
Selecting this 32 mm bore cylinder makes sense when a machine requires a very long reach with exact variable end-stops for product changeovers. Conversely, if the force requirement is lower, you can step down to a smaller bore to save space.
Because the stroke is 950 mm, an external guide is highly recommended to prevent excessive side-loading on the rod. For load-holding without continuous air pressure, this standard SAIJ is insufficient; consider the SAIL or BSAI series instead. To match this cylinder for an ISO 15552 replacement, specify the 32 mm bore, 950 mm stroke, 10 mm adjustment, PT port, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
It can reach a maximum thrust of 82 kgf at 1.0 MPa.
The rear adjuster screw lets you mechanically shorten the nominal 950 mm stroke down to 940 mm. This provides a 10 mm tuning window for precise end-position calibration during setup.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.