
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X950-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 950mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X950-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a usable travel window of 940 to 950 mm, enabling fine end-position tuning without swapping components. This unit includes a magnet for position sensing.
Because the 950 mm stroke exceeds the standard 1000 mm maximum for this bore, it is supplied as a non-standard, made-to-order assembly. The integrated rear stopper allows you to dial back the stroke by up to 10 mm during commissioning, which is far more efficient than machining external stops. The extruded aluminum barrel incorporates sensor grooves on both sides, ready to accept CMSE reed and DMSE electronic switches.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X950-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 940-950 mm retraction point during machine commissioning to accommodate different product lengths without adding external mechanical stops.
Quickly adjust the retract distance on a 950 mm stroke conveyor sorting gate when switching between package sizes on the production line.
Fine-tune the end-of-stroke position to perfect a delicate 32 mm bore pick-and-place operation, ensuring precise alignment before final lockdown.
Choose this 32 mm bore adjustable-stroke cylinder when your machine setup requires exact end-position calibration across a 940-950 mm travel window. If your application needs greater thrust, stepping up to a 40 mm bore increases the 0.5 MPa push force to 628 N. The SAIJ32X950-10-S is selected over a fixed SAI model when product changeovers demand a variable end-stop rather than a rigid, immovable stroke.
At 950 mm of travel, the 12 mm rod is highly susceptible to side-loading and buckling; an external guide is mandatory to prevent premature seal wear. The rear adjuster acts solely as a travel stop and cannot hold the load without live air pressure. For true load-holding without continuous air, consider the SAIL air-released lock or BSAI clamp-lock series. This SKU uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and is dimensionally interchangeable with ISO 15552 cylinders.
Quick checklist
If operated at 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw allows you to mechanically shorten the effective stroke by up to 10 mm, creating a 940-950 mm usable travel window. This stopper sets the end position but does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.