verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X950-20

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X950-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 950mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke950 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$143.27 $150.77Save 4% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X950-20

It features a 12mm carbon steel rod and a PT G1/8 port. With a nominal 950mm stroke and a 20mm adjustment range, you gain a usable travel window of 930-950mm to dial in the exact retract end-position during commissioning.

Because the stroke reaches 950mm on a 32mm bore, the 12mm rod and M10x1.25 thread need careful alignment; an external guide is strongly recommended to prevent side-load wear over this long extension. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to add CMSE or DMSE switches later if positioning feedback becomes necessary.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X950-20 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X950-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke950 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X950-20

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×950Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X950-20 Is Used

settings_input_component

Variable End-Stop Tuning

Fine-tune the retract position by up to 20mm during machine commissioning to perfectly align long-travel parts without adding external stoppers.

precision_manufacturing

Product Size Changeover

Quickly adapt the 930-950mm travel window on packaging lines when handling different product lengths, ensuring precise positioning on the fly.

conveyor_belt

Extended Reach Sorting

Push items across wide conveyor belts using the 950mm stroke, adjusting the final contact point slightly to accommodate varying belt loads.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X950-20 the Right Cylinder?

The adjustable 930-950mm window is perfect for machine setups requiring variable end-stops without swapping cylinders, unlike a fixed-stroke SAI model.

The rear screw acts purely as a travel stop and does not hold the load without live air; for dead-load holding, consider an external rod lock or the SAIL series. This SAIJ unit is dimensionally interchangeable per ISO 15552. To match this replacement exactly, confirm the 950mm stroke, 20mm adjuster, PT G1/8 port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X950-20 FAQ

At 0.7 MPa, the push force increases to 563N.

The rear adjuster screw allows you to shorten the effective stroke by up to 20mm, creating a usable travel window of 930-950mm. It functions as a mechanical stop and does not lock the load without air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X950-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X950-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.