
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X950-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 950mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X950-20-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 930 to 950 mm usable travel window, allowing you to fine-tune the retract end-position during commissioning without adding external stops.
This variant includes a standard carbon steel piston rod and a magnet for position sensing. It supports AirTAC CMSE reed and DMSE electronic sensors fitted into the dual-sided extruded barrel grooves. The rear adjuster functions strictly as a travel stop to set deceleration, not as a lock to hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X950-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 930-950 mm retract position during initial machine commissioning to perfect product handling without machining custom spacers.
Quickly adjust the stroke window on packaging lines when switching to different box sizes, using the rear stopper to set the new travel limit.
Establish precise retract boundaries for automated assembly tools that require slight positional shifts between different production runs.
Choose this 32 mm bore adjustable-stroke cylinder when your application requires exact end-position tuning over a long 950 mm travel. It is ideal for machine setups requiring variable end-stops or product-size changeovers. For load-holding without continuous air pressure, this cylinder is insufficient; consider an AirTAC SAIL pneumatic lock or an external pilot-operated check valve.
Because the 950 mm stroke is substantial for a 32 mm bore, the 12 mm carbon steel rod and M10x1.25 thread will not prevent excessive side loading on their own. An external guide mechanism is strongly recommended to support the load over this extended travel distance. This unit is dimensionally interchangeable per ISO 15552 and uses a reduced mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
The rear adjuster acts as an external stopper that lets you shorten the effective stroke by up to 20 mm, creating a 930-950 mm travel window. It sets the end position and aids deceleration, but it does not lock or hold the load without live air pressure.
At its maximum 1.0 MPa pressure, it can generate up to 82 kgf of push force.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.