
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X950-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 950mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X950-40-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 910 to 950 mm, allowing you to dial back the nominal stroke by up to 40 mm during commissioning.
Because the adjustment mechanism acts as a hard stop on the retract end rather than a locking device, it cannot hold a load without live air pressure. For position holding without continuous air, an external pilot-operated check valve or a related AirTAC series like SAIL or BSAI is required. This carbon-steel rod version includes a magnet for CMSE reed and DMSE electronic sensors.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X950-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 910 to 950 mm retract position during initial commissioning without machining new hard stops.
Quickly adjust the end-stop by up to 40 mm when switching between product lengths on a modular conveyor line.
Provides fine-tuned positioning for automated assembly stations needing precise retract distances without external spacers.
The 40 mm adjustment range is perfect for product changeovers on a line, letting you shift the retract stop dynamically instead of adding external spacers. Remember that the rear adjuster only sets the travel end and relies on the air cushion for deceleration, so it does not function as a brake. To replace an ISO 15552 cylinder, match the 32 mm bore, 950 mm stroke, PT G1/8 port, and the -S magnet. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2. Since the 950 mm stroke is long for a 12 mm rod, an external guide is highly recommended to prevent excessive side-loading.
Quick checklist
The operating speed ranges from 30 to 800 mm/s.
The rear adjuster allows you to shorten the effective stroke from 950 mm down to 910 mm, giving a 40 mm tuning window. It acts as a travel stop for end-position tuning and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.