
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X950-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 950mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X950-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the travel window down from a 950 mm nominal stroke to a minimum of 900 mm. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic switches if a magnet is specified later.
This model uses a PT tapered G1/8 port and relies on variable air cushions at both ends to decelerate the load. The rear adjuster acts strictly as a travel stop for commissioning or product changeovers, not as a load-holding brake. It supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X950-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 900-950 mm end-position during initial machine commissioning without adding external physical stops.
Quickly adjust the travel end-stop on packaging lines when running a new product size that requires slightly less than the full 950 mm stroke.
Move items along a long conveyor section using the 950 mm stroke, fine-tuning the retract distance to match varying package lengths.
The 50 mm adjustment range is ideal for dialing in exact end-stops during machine setup without swapping cylinders, whereas a fixed SAI cylinder locks you into a single dimension. Because the nominal stroke is 950 mm, an external guide is highly recommended to prevent excessive side-load on the 12 mm rod.
For dimensionally interchangeable ISO 15552 replacements, match the 32 mm bore, 950 mm stroke, 50 mm adjustment, PT G1/8 port, and the required mounting accessory. Remember that this plain SAIJ does not hold its position without live air pressure; for true load-holding, select an AirTAC SAIL or BSAI series cylinder instead.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it delivers up to 82 kgf.
The rear adjuster screw lets you shorten the effective travel from the 950 mm nominal stroke down to 900 mm. This allows precise end-position tuning at commissioning without changing the cylinder, acting as a stop rather than a load lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.