Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X150
The AirTAC B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X150 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 150mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke150 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X150
The AirTAC B06-SAID32X150 is a double-acting, double-rod ISO 15552 profile cylinder. The B06- prefix marks this as a battery-manufacturing dedicated variant of the SAID32X150, meaning it is mechanically identical to the base model but designated for cell and pack assembly lines. Because a rod exits both ends, the annulus area is equal on both sides, yielding a uniform push and pull force of 483 N at 0.7 MPa.
This twin-rod design allows you to mount a workpiece on the front rod and a position flag or cam on the rear rod. The extruded aluminum barrel features sensor grooves on both sides. Without a magnet specified, it relies on external physical flags for position sensing, and the adjustable air cushions at both ends provide 27 mm of deceleration.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X150 Technical Specifications
| Model | Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X150 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X150
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X150 Is Used
Battery Cell Stacking
Drives a transfer carriage for lithium-ion cell stacking, using the twin rods to keep the pickup plate perfectly aligned and prevent rotation during indexing.
Dual-Station Actuation
Actuates a front clamping jaw while the rear rod simultaneously drives a mechanical limit flag, synchronizing two assembly actions in a module welding fixture.
Symmetric-Force Transfer
Moves delicate separator foils in a coating line where equal push and pull speeds are required to avoid tension spikes during direction reversal.
Is the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X150 the Right Cylinder?
Choose this 32 mm bore when your battery handling mechanism requires symmetric force and anti-rotation guidance rather than the higher output of a 40 mm bore (which provides 528 N at 0.5 MPa). The double rod prevents the load from twisting during transit, which is critical for aligning delicate battery tabs. If your cell stacking process must hold a load vertically without live air pressure, note that this cylinder will drift; you would need an external rod lock or a SAIL variant instead.
This model is dimensionally interchangeable per ISO 15552, using a PT G1/8 port and an M10x1.25 rod thread. The available mounting accessories include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Since the stroke is 150 mm, side-load stress on the rod bearing is moderate, but external guidance is still recommended for heavy tooling.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X150 FAQ
Because it is a double-rod cylinder, the effective piston area is identical in both directions. It provides an equal push and pull force of 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa.
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated variant of the standard SAID32X150. The physical specifications, including the 32 mm bore, 150 mm stroke, and G1/8 port, remain exactly the same; the prefix simply designates its optimized application scope for battery production lines.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X150
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.