Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X75S
The AirTAC B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 75mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke75 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X75S
The AirTAC B06-SAID32X75S is a double-acting, double-rod ISO 15552 profile cylinder. The "B06-" prefix designates this as AirTAC's battery-manufacturing dedicated variant of the SAID32X75-S, meaning it is mechanically identical to the base model but tailored for cell and pack assembly lines. Because a rod exits both ends, the annulus area is identical on both sides, yielding exactly 483 N of force in both extend and retract directions at 0.7 MPa.
This twin-rod architecture provides superior anti-rotation guidance and allows you to mount a workpiece on the front rod while attaching a position flag or cam on the rear rod. The carbon steel rods thread M10x1.25, and the included -S magnet enables precise end-of-stroke detection using AirTAC CMSE reed or DMSE electronic sensors housed in the dual-side barrel grooves.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X75S Technical Specifications
| Model | Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X75S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X75S Is Used
Battery Cell Stacking
Drives symmetric pressing and stacking mechanisms in prismatic cell assembly, using the equal both-way force to maintain consistent electrode alignment.
Dual-Station Transfer
Actuates two synchronized pick-and-place arms from a single piston, utilizing the rear rod extension to drive a secondary mechanism or position flag.
Anti-Rotation Guiding
Keeps battery module handling slides rotationally stable during horizontal transfer, leveraging the twin-rod geometry to resist torsional deflection.
Is the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X75S the Right Cylinder?
Select this 32 mm bore when your battery-handling fixture requires symmetric force (483 N each way at 0.7 MPa) and cannot tolerate the speed differential of a single-rod cylinder. If your application demands less force, stepping down is not an option in the standard SAI line, but stepping up to a 40 mm bore yields 739 N. Choose the double-rod SAID over the single-rod SAI when you need dual-side guidance, a rear-rod cam, or equal push/pull dynamics.
This cylinder uses a PT tapered port (G1/8) and accepts the reduced SAID mounting set: Basic, FA, LB, TC, FTC, TCM1, TCM2. Note that the adjustable air cushions only decelerate the piston near stroke end; they do not hold a load. If battery power-loss requires the piston to lock in place, specify a BSAID clamp-lock cylinder or an external rod lock. As a true ISO 15552 profile cylinder, it drops into existing ISO 15552 footprints seamlessly.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X75S FAQ
Because it is a double-rod cylinder, the effective piston area is the same on both sides. It delivers an equal push and pull force of 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa.
The B06- prefix indicates this is AirTAC's battery-manufacturing dedicated variant of the SAID32X75-S. It is mechanically identical to the standard SAID32X75-S, with the same ISO 15552 dimensions, 75 mm stroke, and G1/8 port, but designated for battery production line applications.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.