Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X80S
The AirTAC B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X80S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 80mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke80 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X80S
The AirTAC B06-SAID32X80S is a double-acting, double-rod ISO 15552 profile cylinder. The "B06-" prefix marks this as AirTAC's battery-manufacturing dedicated variant of the SAID32X80-S, meaning it is mechanically identical to the standard model but tailored for cell and pack assembly lines. Because a rod exits both ends, the annulus area is symmetrical, delivering an equal 483 N of force in both directions at 0.5 MPa.
This through-rod design allows you to mount a workpiece on the front rod and a position flag or cam on the rear rod. The extruded aluminum barrel features sensor grooves on both sides, and the included magnet (-S) enables precise tracking with CMSE reed or DMSE electronic switches. It uses a PT tapered G1/8 port and adjustable air cushions at both ends to decelerate the piston smoothly.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X80S Technical Specifications
| Model | Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X80S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X80S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X80S Is Used
Battery Cell Stacking
Provides equal extend and retract force for precise, symmetric pressure when stacking battery cells into modules.
Twin-Station Actuation
Drives two synchronized assembly operations simultaneously using both rod ends for balanced throughput.
Anti-Rotation Guiding
Keeps battery handling slides guided against rotation without relying solely on external bearings.
Is the Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X80S the Right Cylinder?
Choose this 32 mm bore when a compact, symmetric force output is required, stepping up to the 40 mm bore (528 N at 0.5 MPa) only if your battery handling fixture needs greater push or pull force. A double-rod cylinder is selected over a single-rod SAI when the application demands dual-side guidance to prevent rotation, or when a rear rod is needed to drive a secondary mechanism. As a direct replacement, match the 32 mm bore, 80 mm stroke, PT G1/8 port, and mounting accessories from the SAID set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that a plain SAID does not hold position if air pressure is lost; for battery stacking loads requiring pneumatic locking, consider the SAIL or BSAID series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X80S FAQ
Because it is a double-rod cylinder, the push and pull forces are identical. It delivers 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa in both directions.
The B06- prefix indicates this is AirTAC's battery-manufacturing dedicated variant of the SAID32X80-S. It is mechanically identical to the standard double-rod ISO 15552 cylinder, featuring the same dimensions, G1/8 port, and 80 mm stroke.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SAID Battery Dedicated ISO Standard Cylinder B06-SAID32X80S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.