Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X150
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC32X150 is a genuine double-acting standard air cylinder with a Ø32mm bore and 150mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke150 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X150
The B06-SC32X150 is an AirTAC double-acting tie-rod cylinder configured for battery manufacturing environments. The B06- prefix designates it as a battery-industry dedicated variant of the standard SC32X150, retaining the exact same mechanical specifications, 32mm bore, and 150mm stroke.
Operating at 0.5 MPa, it provides 402 N of push force and 345 N of pull force. The 12 mm piston rod and 21 mm adjustable cushion ensure reliable deceleration at stroke ends, while the 140 mm body length makes the total extended length 290 mm.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X150 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X150 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X150
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X150 Is Used
Cell Stacking Press
Applies consistent 563 N push force at 0.7 MPa for aligning and stacking prismatic battery cells during module assembly.
Tab Handling
Extends 150mm to position battery tabs for laser welding or ultrasonic bonding stations.
Pack Diverting
Actuates sorting arms to route battery packs on assembly conveyors with rapid 30-800 mm/s cycling.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X150 the Right Cylinder?
This 32mm bore offers 402 N push force at 0.5 MPa; step up to a 40mm bore if your module handling requires 628 N, or down to a smaller profile if space is constrained. For replacement, match the 32mm bore, 150mm stroke, PT1/8 port thread, basic mounting, and no-magnet configuration.
With a 150mm stroke, side loads can stress the 12mm rod bearing. For battery cell stacking or tab alignment, use an external guide rail to prevent rod bending and ensure precise vertical positioning.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X150 FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the SC32X150. It is mechanically identical to the standard SC32X150, featuring the same 32mm bore, 150mm stroke, and 402 N push force at 0.5 MPa.
No, the SC series is double-acting and does not lock position without air pressure. The adjustable cushion only decelerates the piston at stroke ends. To hold a vertical battery cell load, you must use an external mechanical lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X150
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.