Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X150S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC32X150S is a genuine double-acting standard air cylinder with a Ø32mm bore and 150mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke150 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X150S
The B06-SC32X150S is an AirTAC double-acting tie-rod cylinder engineered for battery manufacturing environments. The B06- prefix designates this as a battery-manufacturing dedicated variant of the SC32X150S, meaning it is mechanically identical to the standard model but specified for cell, module, and pack assembly lines. It features a 32mm bore and a 150mm stroke.
Operating at 0.5 MPa, it provides 402 N of push thrust and 345 N of pull thrust. The 12mm piston rod and 21mm adjustable cushion ensure controlled deceleration at stroke ends. A built-in magnet (denoted by the S suffix) allows CMSG, DMSG, or EMSG sensors to clamp directly onto the cylinder barrel for precise position detection.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X150S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X150S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X150S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X150S Is Used
Cell Stacking
Provides the precise 402N push force at 0.5MPa needed for aligning and stacking prismatic battery cells during module assembly.
Tab Welding Press
Uses the built-in magnet for exact position feedback when lowering welding heads onto battery tabs, ensuring consistent contact pressure.
Pack Handling
Actuates routing and sorting gates on conveyor lines transferring battery packs between production zones.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X150S the Right Cylinder?
This 32mm bore is ideal when you need roughly 400 N of force at 0.5 MPa. If your battery handling fixture requires less force, stepping down to a 25mm bore is an option, while heavier pack manipulation may require stepping up to a 40mm bore, which yields 628 N push force at 0.5 MPa. Because this model features a 150mm stroke, it is approaching the threshold where side loads can stress the 12mm rod bearing; ensure the load is guided externally to prevent bending.
When replacing this unit, match these five attributes exactly: 32mm bore, 150mm stroke, PT1/8 port thread, basic mounting style, and the built-in magnet (-S). This AirTAC tie-rod cylinder is dimensionally shorter than an ISO 15552 unit and will not drop into an ISO profile footprint.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X150S FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated cylinder. It is mechanically identical to the standard AirTAC SC32X150S, featuring the same 32mm bore, 150mm stroke, 12mm rod, and PT1/8 port. The prefix simply designates its application in battery cell and pack production lines.
No, the SC series is a double-acting air cylinder and cannot hold a load or lock its position if air pressure is exhausted or the valve is centered. The adjustable cushion only decelerates the piston near the stroke end. A mechanical lock, external rod brake, or pilot-operated check valve is required to hold vertical loads safely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X150S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.