Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X175
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC32X175 is a genuine double-acting standard air cylinder with a Ø32mm bore and 175mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke175 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X175
The B06-SC32X175 is an AirTAC double-acting tie-rod pneumatic cylinder. The B06- prefix marks it as a battery-manufacturing dedicated variant, mechanically identical to the standard SC32X175. It delivers 402 N of push thrust at 0.5 MPa, making it well-suited for medium-duty handling and positioning tasks on cell assembly lines.
This specific configuration features a 32 mm bore and a 175 mm stroke. The unit utilizes a 12 mm piston rod, a PT1/8 port, and adjustable cushions with a 21 mm length to ensure smooth end-of-stroke deceleration. The body length A measures 140 mm, yielding a total extended length of approximately 315 mm.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X175 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X175 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X175
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X175 Is Used
Cell Stacking Press
Applies consistent 402 N force at 0.5 MPa for aligning and pressing battery cells during module stacking operations.
Module Handling
Extends 175 mm to push or divert battery modules along assembly conveyors with smooth adjustable cushioning.
Tab Welding Clamp
Holds battery tabs firmly in place for automated laser welding, relying on double-acting air pressure for rapid cycling.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X175 the Right Cylinder?
This 32 mm bore generates 402 N push force at 0.5 MPa. If your battery stacking or handling fixture requires less force, stepping down is not an option below 32 mm in this range, but stepping up to the 40 mm bore yields 628 N at 0.5 MPa for heavier packs. Since the 175 mm stroke is substantial for a 12 mm rod, avoid direct side loads; use an external guide rail or a guided cylinder to prevent rod bearing bending.
When specifying a replacement, match these five points exactly: 32 mm bore, 175 mm stroke, PT1/8 port thread, basic mounting (no bracket), and no built-in magnet. This SC tie-rod cylinder is dimensionally shorter than ISO 15552 profiles and will not drop into an ISO footprint.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X175 FAQ
The B06- prefix designates this as a battery-manufacturing dedicated cylinder. It is mechanically and dimensionally identical to the standard AirTAC SC32X175, featuring the same 32 mm bore, 175 mm stroke, and TPU seals.
No, the SC series is double-acting and cannot hold position without live air pressure. The adjustable cushion only decelerates the piston near the stroke end; a mechanical lock or external brake is required to hold a load safely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X175
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.