Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X175S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC32X175S is a genuine double-acting standard air cylinder with a Ø32mm bore and 175mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke175 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X175S
The AirTAC B06-SC32X175S is a double-acting tie-rod pneumatic cylinder engineered for battery manufacturing lines. The B06- prefix marks this as a battery-industry dedicated variant of the SC32X175S, meaning it is mechanically identical to the standard model but tailored for cell, module, and pack assembly tasks. Delivering 563N of push force at 0.7 MPa, it is well-suited for precise handling and stacking operations.
This 32mm bore unit features a 175mm stroke and a 12mm piston rod. It includes a built-in magnet (indicated by the S suffix) for seamless integration with CMSG, DMSG, or EMSG sensors. The standard TPU seals support an operating temperature of -20 to +70C, while adjustable cushions at both ends ensure smooth deceleration at stroke extremes.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X175S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X175S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X175S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X175S Is Used
Cell Stacking
Provides the 563N force and 175mm travel needed to precisely press and align battery cells during automated stacking processes.
Tab Welding Feed
Drives electrodes or feeding mechanisms with consistent pressure, using the integrated magnet for position confirmation before welding.
Module Handling
Pushes or diverts battery modules along assembly conveyors where a compact 32mm bore and 140mm body length are required.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X175S the Right Cylinder?
This 32mm bore provides 402N push force at 0.5 MPa; if your battery handling line requires less force, stepping down is not an option as this is the smallest standard SC bore, but stepping up to a 40mm bore yields 628N at 0.5 MPa. Because the 175mm stroke is relatively long for a 12mm rod, avoid applying heavy side loads directly to the rod to prevent bending—use an external guide rail or a guided cylinder for rigid path tracking.
When specifying a replacement, match these five points exactly: 32mm bore, 175mm stroke, PT1/8 port thread, basic mounting (no bracket), and the built-in magnet (-S). Note that the SC series is a tie-rod design and is dimensionally shorter than ISO 15552 cylinders, so it is not a direct ISO replacement.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X175S FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SC32X175S, featuring the same 32mm bore, 175mm stroke, 12mm rod, and forces, but is designated for battery assembly applications.
At 0.7 MPa operating pressure, this double-acting cylinder provides 563N of push force and 345N of pull force at 0.5 MPa. The maximum operating pressure is 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X175S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.