Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X200
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC32X200 is a genuine double-acting standard air cylinder with a Ø32mm bore and 200mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke200 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X200
The B06-SC32X200 is an AirTAC double-acting tie-rod cylinder engineered for battery manufacturing environments, where the B06- prefix designates it as a battery-dedicated variant of the standard SC32X200. Mechanically identical to the base model, it provides a push force of 402 N at 0.5 MPa and features a 12 mm piston rod.
With a 200 mm stroke and a body length A of 140 mm, the total extended length reaches approximately 340 mm. The cylinder incorporates adjustable cushions measuring 21 mm to decelerate the piston smoothly at stroke ends, operating efficiently within a temperature range of -20 to +70 C using standard TPU seals.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X200 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X200 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X200
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X200 Is Used
Cell Stacking
Provides precise push force for aligning and stacking prismatic battery cells during module assembly.
Tab Handling
Actuates sorting and positioning mechanisms for battery tab routing and welding preparation.
Pack Transfer
Drives lifting and pushing motions to transfer battery modules between conveyor stations.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X200 the Right Cylinder?
This 32 mm bore cylinder provides 402 N of push force at 0.5 MPa. If your battery stacking or handling application requires less force, stepping down is not an option below 32 mm in this series, but moving up to a 40 mm bore yields 628 N for heavier packs. For 200 mm strokes, side loads are moderate, but always ensure the load is guided externally to prevent rod bearing wear.
When replacing this unit, match these five critical attributes: 32 mm bore, 200 mm stroke, PT1/8 port thread, basic mounting style, and no built-in magnet. The SC is a tie-rod cylinder and is dimensionally shorter than ISO 15552 profiles, so verify overall length before swapping.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X200 FAQ
The B06- prefix indicates this cylinder is part of AirTAC's battery-manufacturing dedicated line. It is mechanically and dimensionally identical to the standard SC32X200, featuring the same 32 mm bore, 200 mm stroke, and 563 N push force at 0.7 MPa.
No, the SC series is double-acting and cannot hold position without live air pressure. The adjustable cushion only decelerates the piston at the end of the stroke; a mechanical lock or external brake is required to hold a load safely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.