Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X200S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC32X200S is a genuine double-acting standard air cylinder with a Ø32mm bore and 200mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke200 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X200S
The AirTAC B06-SC32X200S is a double-acting tie-rod pneumatic cylinder engineered for battery manufacturing environments. The B06- prefix designates this as a battery-manufacturing dedicated variant of the SC32X200S, meaning it is mechanically identical to the standard model but tailored for cell, module, and pack assembly lines. It delivers a push force of 402 N and a pull force of 345 N at 0.5 MPa.
Featuring a 12 mm rod diameter and a 200 mm stroke, this unit provides a theoretical maximum push force of 724 N at 0.9 MPa. The S suffix indicates a built-in magnet, allowing CMSG, DMSG, or EMSG sensors to clamp directly onto the barrel for precise position detection during automated stacking or handling tasks.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X200S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X200S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X200S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X200S Is Used
Cell Stacking
Provides the precise 402 N push force at 0.5 MPa needed to align and stack battery cells during automated module assembly.
Tab Welding Feed
Utilizes the built-in magnet for exact position confirmation when feeding battery tabs into laser welding stations.
Pack Handling
Handles the routing and positioning of lightweight battery pack components along high-speed conveyor lines.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X200S the Right Cylinder?
This 32 mm bore cylinder is ideal for lighter-duty battery handling, but if your tabbing or sorting process requires more push force, stepping up to a 40 mm bore yields 628 N at 0.5 MPa. Conversely, if space is extremely tight and the load is minimal, a smaller bore should be evaluated. The 200 mm stroke is well within the 1000 mm maximum standard stroke for this bore.
Because this model features a 200 mm stroke, side-load and rod-bearing bending should be considered if the application involves off-center loads. Using an external guide rail or a guided cylinder helps prevent premature wear on the 12 mm rod. When seeking a replacement, match the 32 mm bore, 200 mm stroke, PT1/8 port thread, basic mounting, and the built-in magnet (-S).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X200S FAQ
At an operating pressure of 0.5 MPa, this 32 mm bore cylinder provides a push force of 402 N and a pull force of 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N.
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the SC32X200S. It is mechanically identical to the standard AirTAC SC32X200S cylinder, featuring the same 32 mm bore, 200 mm stroke, PT1/8 port, and built-in magnet, but is designated for battery industry applications.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X200S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.