Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X225
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC32X225 is a genuine double-acting standard air cylinder with a Ø32mm bore and 225mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke225 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X225
The B06-SC32X225 is AirTAC's battery-manufacturing dedicated variant of the standard SC32X225 tie-rod cylinder. The B06- prefix designates its use on cell, module, and pack assembly lines, but mechanically it is identical to the base SC32X225 double-acting pneumatic cylinder. It features a 32mm bore and a 225mm stroke.
Operating on filtered air at 0.15-1.0 MPa, this model delivers a push force of 402 N at 0.5 MPa and reaches 724 N at 0.9 MPa. It uses a 12mm piston rod, a PT1/8 port, and includes 21mm adjustable cushions to decelerate the piston at stroke ends. The body length A is 140mm, yielding a total extended length of approximately 365mm.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X225 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X225 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X225
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X225 Is Used
Cell Stacking
Provides the precise 402 N push force at 0.5 MPa needed for aligning and stacking battery cells in module assembly fixtures.
Module Handling
Actuates sorting gates and pushers on conveyor lines transferring battery modules between production zones.
Tab Welding Press
Drives lightweight welding heads for battery tab connection with a 225mm stroke to clear tooling during cell loading.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X225 the Right Cylinder?
This 32mm bore provides 402 N of push force at 0.5 MPa. If your battery stacking or handling fixture requires less force, stepping down to a 25mm bore is an option, while moving up to a 40mm bore (628 N at 0.5 MPa) offers greater thrust for heavier pack positioning. Ensure your air supply is filtered to 40 um to protect the TPU seals.
With a 225mm stroke, the 12mm rod is subject to bending under side loads. For battery line applications involving heavy tooling or offset loads, use an external guide rail or a guided cylinder to prevent rod bearing wear. When ordering a replacement, match the 32mm bore, 225mm stroke, PT1/8 thread, basic mounting, and non-magnet configuration exactly.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X225 FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SC32X225, featuring the same 32mm bore, 225mm stroke, 12mm rod, and PT1/8 port. The prefix simply designates its optimized supply chain for battery industry production lines.
No, the SC series is double-acting and does not lock or hold position without live air pressure. The 21mm adjustable cushion only decelerates the piston near the end of stroke. If your battery handling application must hold a vertical load during a pressure loss, you must add an external rod brake or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X225
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.