Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X25
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC32X25 is a genuine double-acting standard air cylinder with a Ø32mm bore and 25mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke25 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X25
The AirTAC B06-SC32X25 is a double-acting tie-rod pneumatic cylinder engineered for battery-manufacturing lines. The B06- prefix designates this as a battery-industry dedicated variant of the standard SC32X25, meaning it shares the exact same mechanical specifications. It delivers 402 N of push force at 0.5 MPa and features a compact 140 mm body length A with a 12 mm rod diameter.
With a short 25 mm stroke, this cylinder excels in tight-space actuation like cell stacking or tab welding. It uses adjustable cushions (21 mm) to decelerate the piston smoothly at stroke ends. Note that this is a standard tie-rod design, which is physically shorter than an ISO 15552 cylinder and not dimensionally interchangeable with it.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X25 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X25 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X25
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X25 Is Used
Cell Stacking Press
Provides the 402 N push force at 0.5 MPa needed to hold battery cells tightly during ultrasonic welding or stacking operations.
Tab Welding Clamp
The short 25 mm stroke offers rapid cycling for clamping battery tabs in automated module assembly lines.
Pack Handling Stopper
Acts as a compact routing stopper on battery pack conveyors, fitting within tight 140 mm body length constraints.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X25 the Right Cylinder?
Select this 32 mm bore when your battery-handling fixture requires precise, short-throw clamping. If your application needs slightly less force, stepping down is not an option in this family, but stepping up to a 40 mm bore yields 628 N at 0.5 MPa for heavier module positioning. Because the 25 mm stroke is very short, side-load stress on the rod bearing is minimal compared to longer strokes.
When replacing this unit, match these five attributes exactly: 32 mm bore, 25 mm stroke, PT1/8 port thread, basic mounting (or the specific F-SC32 accessory), and no magnet. If position feedback is required for battery cell alignment, order the -S suffix variant to allow CMSG/DMSG sensor mounting.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X25 FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the standard AirTAC SC32X25 cylinder. It is mechanically identical to the SC32X25, offering the same 402 N push force at 0.5 MPa, 12 mm rod, and PT1/8 port, but is designated for battery cell, module, and pack assembly lines.
No, this is a double-acting air cylinder and does not hold position or lock loads when air pressure is lost or exhausted. The adjustable cushion only decelerates the piston near the stroke end to reduce impact. If your battery assembly process requires position holding without live pressure, you must use an external mechanical lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X25
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.