Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X250S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC32X250S is a genuine double-acting standard air cylinder with a Ø32mm bore and 250mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke250 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X250S
The B06-SC32X250S is a battery-manufacturing dedicated variant of the standard AirTAC SC32X250S, engineered for cell and module assembly lines. The "B06-" prefix designates its industry-specific application without altering the core mechanics. This double-acting tie-rod cylinder provides 563N of push force at 0.7MPa and utilizes a 12mm piston rod.
Equipped with a built-in magnet (S suffix), it supports CMSG/DMSG/EMSG sensors for position detection. With a 250mm stroke and a body length A of 140mm, the total extended length is 390mm. It features adjustable cushions of 21mm to soften end-of-stroke impacts.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X250S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X250S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 250 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X250S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X250S Is Used
Battery Cell Stacking
Ideal for aligning and stacking prismatic battery cells during module assembly, utilizing the magnetic piston for precise position feedback.
Tab and Busbar Handling
Moves delicate battery tabs or busbars into welding position, relying on the 563N force and adjustable cushions to prevent impact damage.
Pack Tray Indexing
Indexes empty or loaded battery pack trays along conveyor lines, where the 250mm stroke provides the necessary push distance.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X250S the Right Cylinder?
This 32mm bore generates 402N push force at 0.5MPa; if your battery stacking or handling fixture needs less force, consider stepping down, or step up to the 40mm bore for 628N. Because the 250mm stroke exceeds 300mm, long unsupported rods are susceptible to bending under side loads—use an external guide or a guided cylinder to prevent rod-bearing damage.
When specifying a replacement, match these five points exactly: 32mm bore, 250mm stroke, PT1/8 port thread, basic mounting (no bracket), and the built-in magnet (-S). This guarantees a direct fit for existing AirTAC SC tie-rod installations.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X250S FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the SC32X250S. It is mechanically identical to the standard model, featuring the same 32mm bore, 250mm stroke, and 563N push force at 0.7MPa, but is designated for battery industry applications.
No, the SC series is double-acting and does not lock or hold position without live air pressure. The adjustable cushion only decelerates the piston near stroke end. For vertical battery handling, you must use an external mechanical lock or pilot-operated check valve to prevent dropping.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X250S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.