Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X25S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC32X25S is a genuine double-acting standard air cylinder with a Ø32mm bore and 25mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke25 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X25S
The B06-SC32X25S is an AirTAC double-acting tie-rod cylinder engineered for battery manufacturing environments. The B06- prefix designates this as a battery-manufacturing dedicated variant of the standard SC32X25S, retaining exact mechanical parity with the base model while highlighting its suitability for cell and module assembly lines.
Delivering 402 N of push force at 0.5 MPa, this compact unit features a 12 mm piston rod and a 140 mm body length A. The integrated S suffix magnet allows CMSG or DMSG sensors to clamp directly onto the barrel for precise end-of-stroke detection in automated stacking and handling tasks.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X25S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X25S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X25S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X25S Is Used
Cell Stacking
Provides precise 25 mm actuation for aligning and stacking battery cells during module assembly.
Tab Welding Clamp
Applies 402 N of clamping force at 0.5 MPa to hold battery tabs securely during ultrasonic welding.
Pack Handling
Uses its magnetic piston feedback to confirm short-stroke pushing and diverting of battery packs on conveyors.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X25S the Right Cylinder?
For slightly higher force requirements, stepping up to a 40 mm bore increases push force to 628 N at 0.5 MPa, while maintaining a similar mounting footprint. The 25 mm stroke on this 32 mm bore cylinder is short, keeping the rod highly rigid and well-supported without needing external guides. To guarantee a correct replacement, match the 32 mm bore, 25 mm stroke, PT1/8 port thread, basic mounting style, and the required built-in magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X25S FAQ
At an operating pressure of 0.5 MPa, this 32 mm bore cylinder generates 402 N of push force and 345 N of pull force. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N.
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the SC32X25S. It is mechanically identical to the standard SC32X25S, featuring the same 32 mm bore, 25 mm stroke, PT1/8 port, and built-in magnet, ensuring seamless physical replacement.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X25S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.