Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X300
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC32X300 is a genuine double-acting standard air cylinder with a Ø32mm bore and 300mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke300 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X300
The B06-SC32X300 is AirTAC's battery-manufacturing dedicated variant of the standard SC32X300 tie-rod cylinder. The B06- prefix designates its use in cell, module, and pack assembly lines, but mechanically it is identical to the base SC32X300 double-acting pneumatic cylinder.
Delivering 402 N of push force at 0.5 MPa, this 32 mm bore unit is built for lighter-duty handling. It features a 12 mm piston rod, PT1/8 ports, and 21 mm adjustable cushions to soften end-of-stroke impact. The 300 mm stroke provides the extended reach needed for tabbing and cell stacking operations.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X300 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X300 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X300
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X300 Is Used
Cell Stacking
Provides the 300 mm reach and 402 N force needed to push and align battery cells into stacking trays during module assembly.
Tab Handling
Actuates sorting gates and positioning stops for battery tab feeding mechanisms on high-speed production lines.
Pack Diverting
Drives lightweight diverting arms to route battery packs through testing stations without exceeding the 82 kgf maximum theoretical limit.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X300 the Right Cylinder?
If your battery line requires slightly less force, stepping down is not an option below 32 mm in this series, but stepping up to a 40 mm bore yields 628 N at 0.5 MPa for heavier pack manipulation. At 300 mm of stroke on a 12 mm rod, this cylinder is susceptible to rod-bearing bending under side loads. Use an external guide rail or a guided cylinder to prevent premature seal wear.
When specifying a replacement, match these five points exactly: 32 mm bore, 300 mm stroke, PT1/8 port thread, basic mounting (no bracket), and no built-in magnet. This ensures a direct fit for existing battery assembly fixtures.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X300 FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated cylinder. It is mechanically and dimensionally identical to the standard AirTAC SC32X300, featuring the same 32 mm bore, 300 mm stroke, and 402 N push force at 0.5 MPa.
No, the SC series is double-acting and cannot hold position without live air pressure. The 21 mm adjustable cushions only decelerate the piston at stroke ends; a mechanical lock or external brake is required to hold a load safely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X300
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.