Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X350
AirTAC B06-SC32X350 Battery-Optimized Standard Cylinder Specifications
- Model: B06-SC32X350
- Series: B06-SC (Battery Special Series)
- Bore size: 32mm
- Stroke: 350mm
- Mounting type: Basic type (Standard) / MF1 Front Flange / MB1 Rear Flange
- Operating pressure: 0.05–0.8 MPa
- Cushioning: Adjustable pneumatic cushion (both ends)
- Ambient temperature: -20℃ to 80℃
- Material:
- Tube: Aluminum alloy (hard anodized)
- Piston rod: SUS304 stainless steel
- End caps: Die-cast aluminum
- Seals: NBR rubber (oil & chemical resistant)
- Weight: 1.82 kg (with standard fittings)
- Dimensions:
- Total length: 424mm (stroke 350 + base length)
- Body diameter: 42mm (outer tube)
- Rod diameter: 12mm
- Mounting hole spacing: 60mm (MF1/MB1 flange pattern)
- Port size: G1/8 (dual ports both ends)
- Protection class: IP54 (standard sealing)
- Lubrication: Pre-lubricated (maintenance-free for 2,000km operation)
High-efficiency pneumatic cylinder optimized for battery-powered systems, featuring reduced air consumption and enhanced sealing for intermittent operation. The hard-anodized tube surface resists abrasive particles in mobile applications. Dual cushion adjustment screws allow precise end-position deceleration control.
- Lithium battery module assembly presses
- Portable energy station lifting mechanisms
- AGV material handling clamp actuators
- Solar panel cleaning robot articulations
- EV charging connector engagement systems
Installation guidelines:
For vertical installations exceeding 45° angle, use MB1 rear flange mounting with 0.3mm shim adjustment.
Maintain 15mm minimum clearance around cushion screws for maintenance access. Lubricate rod with PAS-2 grease
if used in >70℃ environments.
| Property | Property Value |
|---|---|
| sku | B06-SC32X350 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.