Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X400S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC32X400S is a genuine double-acting standard air cylinder with a Ø32mm bore and 400mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke400 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X400S
The B06-SC32X400S is an AirTAC double-acting tie-rod cylinder engineered for battery manufacturing lines. The B06- prefix designates this as a battery-industry dedicated variant of the standard SC32X400S, meaning it is mechanically identical to the base model. It features a 32mm bore and a 400mm stroke, generating 402N of push force at 0.5 MPa.
Equipped with a built-in magnet (S suffix), this unit supports CMSG, DMSG, or EMSG sensors for position detection. It uses a 12mm piston rod, PT1/8 ports, and has a body length A of 140mm, yielding an extended length of 540mm. The adjustable cushion length is 21mm, ensuring smooth deceleration at stroke ends.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X400S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X400S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X400S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X400S Is Used
Cell Stacking Presses
Provides the 402N extension force needed to align and press lithium-ion battery layers during automated cell stacking operations.
Module Handling
Actuates sorting gates and pushers on conveyor lines, using the magnetic sensor to confirm part movement for battery module assembly.
Tab Welding Fixtures
Secures battery tabs and foils in position for laser welding, utilizing the 400mm stroke to reach across wide fixture plates.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X400S the Right Cylinder?
This 32mm bore provides 402N push and 345N pull at 0.5 MPa. If your battery stacking or handling process requires greater clamping power, stepping up to a 40mm bore increases push force to 628N. The included magnet allows precise end-of-stroke signaling for automated cell assembly. For a direct replacement, match the 32mm bore, 400mm stroke, PT1/8 thread, basic mounting, and the S magnet option.
Because this model features a 400mm stroke on a 12mm rod, it is susceptible to rod bearing bending under side loads. For battery handling tasks that involve heavy or off-center loads, use an external guide rail or a guided cylinder to prevent premature seal wear and rod deflection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X400S FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SC32X400S, offering the same 32mm bore, 400mm stroke, 12mm rod, and 402N force at 0.5 MPa, but is designated for battery industry applications.
The 400mm stroke on a 12mm rod makes it vulnerable to bending under side loads. For battery cell handling or pressing applications with off-center loads, an external guide or a guided cylinder should be used to prevent rod deflection and extend bearing life.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X400S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.