Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X450
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC32X450 is a genuine double-acting standard air cylinder with a Ø32mm bore and 450mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke450 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X450
The B06-SC32X450 is an AirTAC double-acting tie-rod cylinder engineered for battery manufacturing environments. The B06- prefix designates this as a battery-manufacturing dedicated variant of the standard SC32X450, meaning it is mechanically identical to the base model without altering any physical specifications. Delivering 402 N of push force at 0.5 MPa, it is well-sized for cell handling and module positioning tasks.
This unit features a 32 mm bore, a 450 mm stroke, and a 12 mm piston rod. It includes adjustable cushions measuring 21 mm to decelerate the piston at stroke ends, and its body length A is 140 mm. Operating on filtered air between 0.15 and 1.0 MPa, it reaches speeds of 30-800 mm/s.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X450 Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X450 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X450
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X450 Is Used
Cell Stacking Press
Applies consistent 402 N push force at 0.5 MPa to align and press battery cell layers during automated stacking processes.
Module Handling
Extends 450 mm to push battery modules onto conveyor lines or transfer them between assembly stations.
Tab Welding Positioning
Moves battery cells into exact position for tab welding, relying on the 30-800 mm/s speed range for high throughput.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X450 the Right Cylinder?
This 32 mm bore generates 402 N push and 345 N pull at 0.5 MPa. If your battery stacking or handling process requires less force, stepping down is not an option below 32 mm in this family, but stepping up to the 40 mm bore yields 628 N at 0.5 MPa for heavier pack manipulation. For exact replacements, match the 32 mm bore, 450 mm stroke, PT1/8 port thread, basic mounting, and non-magnet configuration.
Because this model has a 450 mm stroke, the 12 mm rod is susceptible to bending under side loads. For battery cell alignment and stacking mechanisms that generate lateral forces, use an external guide rail or a guided cylinder to prevent rod bearing wear and ensure precise positioning.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X450 FAQ
The B06- prefix indicates this is an AirTAC battery-manufacturing dedicated cylinder. It is mechanically identical to the standard SC32X450, featuring the same 32 mm bore, 450 mm stroke, 12 mm rod, and 402 N force at 0.5 MPa, with no changes to physical specs or materials.
The SC series is a tie-rod cylinder and does not inherently resist side loads. With a 450 mm stroke and a 12 mm rod, external guides or a guided cylinder are required to prevent rod bending and bearing damage during lateral positioning tasks.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X450
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.