Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X450S
The AirTAC B06-SC Battery-Dedicated Standard Cylinder B06-SC32X450S is a genuine double-acting standard air cylinder with a Ø32mm bore and 450mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ32 mm
- Stroke450 mm
- Port sizePT1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 21 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X450S
The B06-SC32X450S is an AirTAC double-acting tie-rod cylinder engineered for battery manufacturing environments. The B06- prefix designates this as a battery-manufacturing dedicated variant of the standard SC32X450S, meaning it is mechanically identical to the base model but tailored for cell, module, and pack assembly lines. Featuring a 32mm bore and 450mm stroke, it provides a push force of 402N at 0.5 MPa (563N at 0.7 MPa).
This unit includes a built-in magnet (S suffix) allowing CMSG, DMSG, or EMSG sensors to clamp directly onto the barrel for precise position detection. It utilizes a 12mm piston rod, PT1/8 ports, and adjustable cushions measuring 21mm to decelerate the piston at stroke ends. With a body length A of 140mm, the total extended length reaches 590mm.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X450S Technical Specifications
| Model | Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X450S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X450S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X450S Is Used
Battery Cell Stacking
Drives the precise linear indexing required for layering battery cells during prismatic cell assembly.
Tab Welding Press
Provides the 563N clamping force at 0.7 MPa needed to hold battery tabs securely during ultrasonic welding.
Module Handling
Extends 450mm to push battery modules from assembly conveyors into testing racks.
Is the Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X450S the Right Cylinder?
This 32mm bore generates 402N of push force at 0.5 MPa; if your battery stacking or handling fixture requires less force, stepping down is not an option below 32mm in this tie-rod series, but stepping up to a 40mm bore yields 628N at 0.5 MPa. Because this model features a 450mm stroke on a 12mm rod, the unsupported length is significant. Long, thin rods bend under side load, so external guides or a guided cylinder are strongly recommended to prevent rod-bearing damage and premature seal wear.
When ordering a replacement, match these 5 points exactly: 32mm bore, 450mm stroke, PT1/8 port thread, basic mounting (no bracket), and the built-in magnet (-S). Note that the SC series is a tie-rod cylinder and is shorter than ISO 15552 profile cylinders, so it is not a direct dimensional replacement for ISO standards.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X450S FAQ
The B06- prefix indicates this is a battery-manufacturing dedicated variant of the SC32X450S. It is mechanically identical to the standard SC32X450S, with the same 32mm bore, 450mm stroke, and 12mm rod, but designated for battery production line applications.
No, this is a double-acting air cylinder and does not hold position or lock when pressure is lost or exhausted. The adjustable cushion only decelerates the piston at the end of the stroke to soften impact; a mechanical lock or external brake is required to hold a load safely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac B06-SC Battery-Dedicated Standard Cylinder B06-SC32X450S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.